A breakthrough in wireless technology, the Brace DWG-1000 blows away traditional analog wireless systems and gives you something cables can’t: natural tone and freedom to roam the stage or control room.

Frequency response of 10Hz to 15kHz delivers thunderous lows and crystal-clear highs rivaling the most expensive audio cables without the static, pumping, breathing, and dropouts found in dynamics-destroying companding and other side effects of analog systems. Brace Audio’s unique internal dome antenna design helps immensely for drop out avoidance and also prevents antenna breakage.

The DWG-1000 is rugged and a no-brainer to use. ALL™ Automatic Channel Selection and Locking transparently links the transmitter to the receiver the moment the units are powered on. Depending upon conditions, up to twelve DWG-1000 Digital Wireless Systems can be used simultaneously onstage and up to six DWG-1000-TX transmitters can link to a single DWG-1000 receiver.

Operating at 2.4 GHz, the DWG-1000 includes a declaration of conformity, so you’ll never worry about their wireless being confiscated when traveling internationally and is certified for use in USA, Canada and the EU.

Transmitter:
*RF Output Power: 16 dBm
*Maximum Input Level: 2.75v peak to peak
*THD: <2% @ 800 mV pp 1 kHz tone
*S/N Ratio: more than 90 dB
*Battery Life: 5 hours (AA size battery)
*Output: 33mm, 1/8 in. mono Jack
*System gain: 1
*Frequency: 2.4 GHz, FHSS
*Input Impedance: 600K ohm
Operating Power Voltage: 3.0V Typical
Audio Frequency Response: 10 Hz – 15 kHz
Lower Battery Alert: 15 minutes of life left
Antenna: Internal dome
Units operating at same time: 8-12

Receiver:
Frequency Type: 2.4 GHz, FHSS
Battery Life: 7 hours (AA size battery)

Product contains
1 Transmitter
1 Receiver
2 – 1/4″ to 1/8″ Guitar Cables
Belt Clip

No related posts.

Related posts brought to you by Yet Another Related Posts Plugin.